Matters needing attention in the use of white corundum abrasive in sandblasting and rust removal
In sandblasting, rust removal, polishing and grinding, white corundum abrasive is a very good choice, but in sandblasting and grinding operations, the requirements are very high. What problems should be paid attention to during use.
What are the precautions for white corundum in sandblasting and rust removal:
1. The rust of the workpiece is a common problem in the industry. It is necessary to use white corundum abrasive for sandblasting and rust removal. During the treatment, attention should be paid to waterproofing. The white corundum should be kept dry and clean to ensure the effect of use.
⒉. In sandblasting, the single use of white corundum sand will make the sandblasting effect not obvious, and it needs to be used in conjunction with other abrasive materials to play a better treatment effect. 3. After the sandblasting operation is completed, the surface of the workpiece needs to be cleaned to avoid re-contamination.
4. After white corundum is used, it can be recycled and reused, and sandblasting and grinding can be repeated. The white corundum abrasive can be collected for other purposes after it loses sandblasting, and can be used as building fillers and so on.
5. White corundum sandblasting abrasive should pay attention to the temperature and humidity when sandblasting, otherwise the effect of sandblasting and rust removal will be affected.
The above is a brief introduction to the matters needing attention for white corundum abrasive blasting and rust removal. If you have any other questions, you can contact us