White Fused Alumina: Preferred Separation Sand for Graphite Boxes, Graphite Boats and Saggers — Anti-Sticking at High Temperature & Higher Sintering Yield
For atmosphere sintering of lithium battery anode & cathode materials, MLCC electronic ceramics, powder metallurgy and magnetic materials, graphite boxes, graphite boats and SiC saggers are widely used as firing carriers. During sintering, liquid phase tends to leach out from green bodies. Direct contact easily causes sticking, warpage and breakage of parts, and corrodes graphite carriers to shorten their service life. With reliable high-temperature performance, high-purity white fused alumina sand is the mainstream separating bedding material in the industry.
- Excellent chemical inertness at high temperature White fused alumina : Al₂O₃ ≥99.5%. Its melting point exceeds 2050℃. It remains stable under 1000–1700℃ and inert in nitrogen or argon reducing atmosphere.
- Point-support structure prevents sticking and warpage Spread evenly, white fused alumina grit forms a point-support layer between green bodies and graphite boats. It blocks direct contact between liquid phase and graphite surface. Meanwhile, gaps between grains allow free shrinkage of parts and release internal stress, greatly cutting rejection caused by warpage and cracking.
- Good air permeability to reduce bottom defects Intergranular gaps provide escape channels for decomposition gas. It avoids blisters and pinholes from trapped gas. Heat distribution becomes uniform, which ensures consistent dimension and performance across batches.
- Protect graphite boats and cut consumable cost It prevents liquid phase corrosion of graphite substrates, reducing frequent polishing and cleaning work.
- Grit selection guide F80#, F100#, F120# for lithium battery powder and thick green bodies
F150#, F180#, F240# for thin MLCC ceramic sheets and precision small parts Fine powder grade for ultra-thin green bodies
